FireAde Class A

Mix Calculator


Fire Service Plus®, Inc. has designed this pre-mix calculator for fire departments that want to pre-mix water tanks with FireAde® products. Add the tank size with the desired percentage of product to get amount of concentrate required. This calculator may be used using standard or metric calculations. Please contact Fire Service Plus®, Inc. for any questions or concerns at 770-460-7793.

Concentrate Required

Water Required

FireAde Class A

Environmentally formulated FireAde® Class A foam is the newest generation in Class A nonfluorinated foam. Using Green Agent Technology™, this fluorine free formula prevents environmental hazards and demonstrates our long term commitment to the environment. The foam agent is formulated to prevent additional environmental hazards when applied to a fire. The ability of FireAde® Class A foam to not only extinguish but sustain extinguishment once applied is superior to other Class A foams. FireAde Class A will not clog, gum, or corrode foam systems and equipment. This concentrate implements a dramatically changed chemistry compared to most Class A foams. This chemistry enables FireAde® Class A foam to be used in all types of foam portioning systems, compressed air foam systems (CAFS), in-line eductors, and standard foam equipment.


  • Grass fires and Initial Structural Knockdown:
    0.10% - 0.25%
  • Tire Fires, Landfill Fires, Coal Fires and Wildland Fires:
    0.25% - 0.50%
  • Car/Vehicle Fires and Overhaul:
    0.50% - 1.0%

Application Notes

Recommended to set foam system defaults between 0.25% and no more than 0.50%

Compressed Air Foam Systems (CAFS) should be calibrated using a foaming solution under 50 cps for accurate calibration


FireAde® Class A is compatible with other brands of Class A foam concentrates.

FireAde® Class A is compatible with any Class B FireAde® concentrates.

Flushing Instructions

It is recommended to flush all Class A foam tanks if possible. If not, use as much of previous Class A foam, then add FireAde® concentrate. Mixing with most Class A foams will not cause harm to systems.

Brochure Product Guide

SDS Sheet
FireAde wet line

Environmental Requests

All requests for specific disposal and environmental information must be made in writing to J.C. Barb at the email address

FireAde recommends disposal only by approved methods. Please refer to local guidelines and requirements when disposing of FireAde products.

Physical Properties

Appearance Natural/Clear
PH 7.5 - 8.5
Viscosity 6.2cps
Min. Storage Temp. 35°F (2°C)
Max Storage Temp 120°F (49°C)
Effects of Freeze/Thaw None

Shelf Life

FireAde® Class A Foam has an unlimited shelf life.

Shipping Information

FireAde® Class A Foam concentrate is available in pails, drums, totes, and bulk shipments.

Please contact Fire Service Plus® for more information.

Contact Us

Sign Up For Our Newsletter