FireAde Training Foam

Mix Calculator


Fire Service Plus®, Inc. has designed this pre-mix calculator for fire departments that want to pre-mix water tanks with FireAde® products. Add the tank size with the desired percentage of product to get amount of concentrate required. This calculator may be used using standard or metric calculations. Please contact Fire Service Plus®, Inc. for any questions or concerns at 770-460-7793.

Concentrate Required

Water Required

FireAde Training Foam

Environmentally formulated FireAde® Training foam is the best training solution for departments who use FireAde® or other foams.  FireAde Training will not clog, gum, or corrode foam systems and equipment. This non-fluorinated concentrate allows for foam training at 1%, 3%, and 6% for departments. FireAde® Training Foam is suitable for use in all types of foam portioning systems, compressed air foam systems (CAFS), in-line eductors, and standard foam equipment.

Please contact Fire Service Plus®, Inc. for foam training classes at 770.460.7793.


  • Grass fires and Initial Structural Knockdown:
    0.10% - 0.25%
  • Tire Fires, Landfill Fires, Coal Fires and Wildland Fires:
    0.25% - 0.50%
  • Car/Vehicle Fires and Overhaul
    0.50% - 1.0%
  • Recommended to set foam system defaults between
    0.25% and no more than 0.50%
  • Compressed Air Foam Systems (CAFS) should be calibrated using a foaming solution
    under 50 cps for accurate calibration


FireAde® Training is compatible with other brands of Class A foam concentrates.

FireAde® Training Foam is compatible with any Class B FireAde® concentrates.

Flushing Instructions

It is recommended to flushall Class A foam tanks if possible. If not, use as much of previous Class A foam, then add FireAde® concentrate. Mixing with most Class A foams will not cause harm to systems.

Brochure Product Guide

SDS Sheet

Environmental Requests

All requests for specific disposal and environmental information must be made in writing to J.C. Barb at the email address

FireAde recommends disposal only by approved methods. Please refer to local guidelines and requirements when disposing of FireAde products.

Physical Properties

Appearance: Natural/ Clear
PH: 7.5-8.5
Viscosity: 6.2cps
Min. Storage Temp.: 35°F (2°C)
Max Storage Temp.: 120°F (49°C)
Effects of Freeze/Thaw: None

Shelf Life

FireAde® Training Foam has an unlimited shelf-life.

Shipping Information

FireAde® Training Foam concentrate is available in pails, drums, totes, and bulk shipments.

Please contact Fire Service Plus® for more information.

Contact Us

Sign Up For Our Newsletter